â¬0.00
The expansion tank is an additional component of the heating system circuit, where flow-through electric heating is used as an independent closed system for heating the hot water, serving as a heat transfer medium circulating in the duplicator of food cooking boilers, reactors, pasteurizers, and other food processing equipment. In heating systems with water heaters operating at temperatures up to 110°C, the expansion tank is necessary to accommodate the increased volume of the heat transfer medium as it expands when heated.
- Special high-pressure vessel â allows to withstand pressure of up to 5 bar in the system.
- Allows the use of a heat generator with superheated water up to 110°C.
- Has different volume options, depending on the volume of the heat transfer medium, selected additionally.
The expansion tank is used in heating systems with superheated water up to 110°C for heating the thermal medium in the heating jacket (duplicator) of various cooking boilers, reactors, evaporators or pasteurizers.
A special expansion tank in the form of a high-pressure vessel is necessary to regulate the volume of water in a closed system during heating. The tank also helps maintain the pressure level in the system.
- Type of the equipment: Optional equipment
You might also like
HEAT GENERATORS
Flow-through water heater up to 110° C
Flow-through water heater up to 110° C
A flow-through water heater is a device for flow-through electric heating of water in heating systems for cooking boilers, evaporators and other units where it is necessary to supply a hot heat transfer medium - superheated water - to the heating jacket (duplicator). When choosing a flow-through heater, it is necessary to select a circulation pump based on the volume of the jacket or heat transfer vessel.
- The heater allows you to heat water up to 110 degrees
- Easily integrated into heating systems
- Has heating temperature regulation
- 2 stages of heating power adjustment
- Independent control panel with protection against overheating and "dry" running
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 2/3/6/9/10/12
- Principle of operation: Continuous mode
Flow-through water heater up to 110° C
Out of stock
PUMPS
Circulation pump for a flow-through water heater
Circulation pump for a flow-through water heater
The circulation pump for the heating system is a mandatory component for the operation of a flow-through heating system used for heating the water serving as a heat transfer medium inside the duplicator of industrial cooking boilers, mixers, reactors, and vacuum evaporators in food production. It is selected based on the required parameters of the heating system (volume). Our specialists will be happy to assist you in selecting the appropriate pump if you provide the technical specification requirements. This pump is an essential additional component for the flow-through water heaterÂup to 110°C.
- It can be used to circulate water at temperatures up to 110° C
- High efficiency with low power consumption
- Also suitable for central heating systems, heated floors and even for solar systems
- Small connections allow the use of flexible pipes with a smaller diameter
- Type of the equipment: Optional equipment
Circulation pump for a flow-through water heater
Out of stock
COOLING EQUIPMENT
Water Chiller CWP 300
Water Chiller CWP 300
A chiller is a cooling machine that removes heat from a liquid through vapor compression and absorption in a cyclic manner.
For additional information, please email us at sales@foodtechprocess.com
Water Chiller CWP 300
1 in stock
ACCESSORIES
Thermometer -50 / 150°C
Thermometer -50 / 150°C
A thermometer is a precision tool used to measure product temperature in food processing, ensuring accurate control during cooking, mixing, and other food production processes. It helps to maintain consistency, optimize processing conditions, and meet safety standards in industrial food processing equipment like cooking kettles, blanchers and fryers.
Thermometer -50 / 150°C
3 in stock
ACCESSORIES
Balls for grinding chocolate
Balls for grinding chocolate
Steel balls for grinding chocolate are essential components used in ball/bead mills. These 6 mm diameter balls are made out of hardened steel and are considered as consumables required for operating the BALL MILL 5.
- Spherical shape with a diameter of 6 mm
- High hardness steel
- Supplied in 30 kg boxes
- The mill requires 2 boxes (60 kg in total).
- Type of the equipment: Spare parts
Balls for grinding chocolate
2 in stock
ACCESSORIES
Product unloading paddles
Product unloading paddles
A set of additional paddles for transporting and unloading the product from the working area of ââthe universal 400/1100/12 fryer.
Product unloading paddles
Out of stock
ACCESSORIES
Thermal insulation for the condensation MAK DRYER 4-14
Thermal insulation for the condensation MAK DRYER 4-14
Thermal insulation of the drying cabinet body to reduce heat loss during product drying. Additional option for the MAK DRYER 7-14.
For more information contact: sales@foodtechprocess.com
Thermal insulation for the condensation MAK DRYER 4-14
1 in stock
ACCESSORIES
Colloid mill stand 132
Colloid mill stand 132
Stand (support structure) for colloid mill machine - additional option for the colloid mill 132
For more information, contact: sales@foodtechprocess.com
Colloid mill stand 132
Out of stock
ACCESSORIES
Frequency inverter IP66
Frequency inverter IP66
Frequency inverters are used together with, and installed directly on equipment without the need to install additional electrical cabinets.Â
We also offer programming and installation of the frequency converter to ensure seamless integration and optimal functionality for your specific requirements.
For more information or to request more details contact: sales@foodtechprocess.com
Frequency inverter IP66
Out of stock
ACCESSORIES
Impellers
Impellers
An impeller is the rotating part of a pump or turbine that moves fluids by converting rotational energy into fluid motion
Impellers
Out of stock
ACCESSORIES
Protective decorative cover for the colloid mill 132
Protective decorative cover for the colloid mill 132
Protective decorative cover for colloid mill 132 (additional option)
For more information or to request more details contact: sales@foodtechprocess.com
Protective decorative cover for the colloid mill 132
1 in stock
FILTRATION EQUIPMENT
Filter for hot oil
Filter for hot oil
A hot oil filter for continuous industrial tabletop fryers allows you to quickly and effectively filter oil immediately after the frying process.
- Hot oil filtration - oil temperature up to 200 °C.
- Optional filter material - paper, stainless steel
Filter for hot oil
1 in stock
FRYERS
Second pressure conveyor for the modular fryer 400/1100/12 - additional module
Second pressure conveyor for the modular fryer 400/1100/12 - additional module
Optional module for the 400/1100/12 universal tabletop Modular Fryer - Pressure Conveyor for frying foods that require forced immersion in oil.
Second pressure conveyor for the modular fryer 400/1100/12 - additional module
Out of stock
ACCESSORIES
Hopper with a valve DN32
Hopper with a valve DN32
Additional option to VMG laboratory vacuum homogenizer 20/50.
Hopper with a valve DN32
1 in stock
FILTRATION EQUIPMENT
Cyclone dust collector
Cyclone dust collector
The cyclone dust collection system is ideal for food processing facilities looking to prevent contamination by airborne particles, reduce product loss, and maintain a cleaner work environment.
Cyclone dust collector
Out of stock
ACCESSORIES
Sight glass with a light DN65 on the cover
Sight glass with a light DN65 on the cover
Additional option to VMG laboratory vacuum homogenizer 20/50.
Sight glass with a light DN65 on the cover
1 in stock
ACCESSORIES
Digital Brix Refractometer
Digital Brix Refractometer
Within seconds, the device measures the refractive index of the sample and converts it to % of solids using the concentration unit.
The refractometer is ready for use after a simple user calibration with deionized or distilled water.
Digital Brix Refractometer
Out of stock
ACCESSORIES
Refractometer for jam cooking equipment
Refractometer for jam cooking equipment
Industrial refractometers are used to measure the concentration level of liquids in a continuous flow across various industries, applications, and industrial setups. They provide real-time measurement data, ensuring precise process control and maintaining the desired concentration of liquids. This enables industrial automation by eliminating the need for manual sampling and adjustments, allowing for consistent and accurate production.
Refractometer for jam cooking equipment
Out of stock
